Girard Associates, Inc. & Girard Engineering, Inc. - Cleveland, Ohio - Forging and Industrial Controls / Enclosures

Technical Data for Hotmatic Hotformer: AMP 70 and AMP 70 XL

	AMP 70 (XL) (metric)	AMP 70 (XL) (English)
>>> Working Range	--	--
Initial weight	0.4 - 5.0 kg	.90 - 11 lb
Maximum outer diameter for round parts	145 mm (165 mm)	5.71 in (6.50 in)
Maximum outer diameter for combination blanks	132 mm	4.8 in
Bar diameter	36 - 75 mm	1.4 - 3.0 in
Cut-off length	50-150 mm	1.97 - 5.91 in
>>> Performance Data	--	--
Strokes per minute (infinitely variable)	50-80	50-80
Total tonnage	15000 kN	15000 kN
Drive Motor	350 kW	350 kW
Tooling: (Die diameter)	--	--
Forming stations	4	4
1st station	220 mm	8.66 in
2nd station	290 mm (270 mm)	11.42 in (10.63 in)
3rd station	290 mm (310 mm)	11.42 in (12.20 in)
4th station	270 mm (250 mm)	10.63 in (9.84 in)
>>> Strokes	--	--
Main slide	320 mm	12.60 in
Die ejectors	150 mm	5.91 in
Punch ejectors	50 mm	1.97 in
>>> Utility Requirements	--	--
Electrical:	--	--
Power supply	550 kVA	550 kVA
Cooling Water:	--	--
Pressure	6 bar	87 psi
Maximum flow rate (depends on forging)	120 m^3/h	31700 US gal/h
Compressed Air:	--	--
Pressure	5.5 - 10 bar	80-145 psi
Consumption (noncompressed state)	4 Nm^3/h	140 ft^3/h
>>> Utility Requirements (Dimensions with noise abatement cabin and operator platform, not including heater, conveyor, tool block changer)	--	--
Length	13600 mm	535 in
Width	9600 mm	378 in
Height	4450 mm	175 in
Feed line above floor	1500 mm	59 in
Weight	187 t	412000 LB