Girard Associates, Inc. & Girard Engineering, Inc. - Cleveland, Ohio - Forging and Industrial Controls / Enclosures

Technical Data for Hotmatic Hotformer: AMP 50 XL

	AMP 50 XL (metric)	AMP 50 XL (English)
>>> Working Range	--	--
Initial weight	.17 - 2.0 kg	.37 - 4.42 lb
Maximum outer diameter for round parts	104 mm	4.09 in
Maximum outer diameter for combination blanks	87 mm	3.43 in
Bar diameter	28-55 mm	1.10 - 2.17 in
Cut-off length	32-110 mm	1.25 - 4.33 in
>>> Performance Data	--	--
Strokes per minute (infinitely variable)	60-100	60-100
Total tonnage	8000 kN	8000 kN
Drive Motor	170 kW	170 kW
Tooling: (Die diameter)	--	--
Forming stations	4	4
1st station	160 mm	6.30 in
2nd station	215 mm	8.46 in
3rd station	215 mm	8.46 in
4th station	200 mm	7.87 in
>>> Strokes	--	--
Main slide	240 mm	9.45 in
Die ejectors	90 mm	3.54 in
Punch ejectors	35 mm	1.38 in
>>> Utility Requirements	--	--
Electrical:	--	--
Power supply	350 kVA	350 kVA
Cooling Water:	--	--
Pressure	6 bar	87 psi
Maximum flow rate (depends on forging)	70 m^3/h	18500 US gal/h
Compressed Air:	--	--
Pressure	5.5-10 bar	80-145 psi
Consumption (noncompressed state)	3 Nm^3/h	100 ft^3/h
>>> Utility Requirements (Dimensions with noise abatement cabin and operator platform, not including heater, conveyor, tool block changer)	--	--
Length	7500 mm	398 in
Width	5220 mm	305 in
Height	2650 mm	126 in
Feed line above floor	1300 mm	51.2 in
Weight	84 t	198000 lb